3D Model Construction of Turntable and Robotic Arm Sequence

Authors

  • Norliana Azhar Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Durian Tunggal, Melaka, Malaysia
  • Wira Hidayat Mohd Saad Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Durian Tunggal, Melaka, Malaysia
  • Saiful Anuar Abd. Karim Department of Electrical Engineering, Politeknik Ibrahim Sultan, 81700 Pasir Gudang. Johor, Malaysia
  • Norhashimah Mohd Saad Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Durian Tunggal, Melaka, Malaysia
  • Nurulfajar Abd Manap Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Durian Tunggal, Melaka, Malaysia

Keywords:

Autonomous robotic arm, turntable, image acquisition, silhouette-based approach, 3D model reconstruction and accuracy,

Abstract

This study is done to evaluate the factors affecting the 3D reconstruction model by using a different image acquisition technique; an autonomous rotatable robotic arm and a turntable. Two sets of sequential images were obtained using different projection angle of the camera. The silhouettebased approach is used in this study for 3D reconstruction from the sequential images captured of several different angles of the object. Other than that, an analysis based on the effect of a different number of sequential images to the accuracy of 3D model reconstruction was also carried out with a fixed projection angle of the camera. The effecting elements in the 3D reconstruction are discussed and the overall result of the analysis is concluded according to the prototype of imaging platform. It shows that, by using a robotic arm resulting with better final image reconstruction.

References

L .Notano, R.Minghim, M.Oliveira, “A Novel Approach for Delaunay 3D Reconstruction With a Comparative Analysis In The Light of Applications,” Vol. 20, Issue 2, pp. 161-174, 2001.

V.Fremont, R..Chellali, “Turntable-based 3D Object Reconstruction,” Vol.2, pp. 1277-1282, 2004.

T.Moons, L.V Gool, M.Vergauwen, “3D Reconstruction From Multiple Images,” Vol. 4, Issue 4, pp. 287-398, 2009.

J.Arnabat, S.Casanovas, G.Medioni, 3D Modeling from Turntable Sequences Using Dense Stereo Carving and Multiview Consistency, University of Southern California, 2004.

A.Laurentini, “The Visual Hull Concept for Silhouette-Based image Understanding,” IEEE Trans.PAMI, 2004, pp. 150-162.

Cytron Technologies, G15 Servo Motor User’s manual. 2012. Retrived from, www.cytron.com.my

S.Izadi et al., “KinectFusion: Real-time 3D Reconstruction and Interaction Using a Moving Depth Webcam,” UIST’11, USA, 2011.

E.Carney ,Computational Modeling of the Helical Axis in the Human Knee-Detecting Changes in the Transverse Plane. MSc Thesis, Virginia Commonwealth Univ. U.S. 2009.

A.Fitzgibbon, G.Cross, A.Zisserman, “ Automatic 3D Model Construction for Turn-table Sequences,” Proceedings of the European Workshop on 3D Structure from Multiple Images of Large-Scale Environments, pp.155-170, 1998.

M.C Perez, M.Casamitjana, E.X Martin, “Space Carving Acceleration Using Uncertainty Measurements,” Vol. 5524, pp. 112-119, 2009.

A.Bottino, A.Laurentini, “The Visual Hull of Smooth Curved Objects,” IEEE Trans. Patt. Anal. Mach. Intell, 2004,. 26(12),1622– 1632.

N.Ukita, K.Matsuda, “3D Reconstruction with Globally-Optimized Point Selection,” IEICE Trans.INF.& SYST.,Vol. E95-D, NO.12, 2012.

N.B Azhar, W.H.B.M Saad, N.B.A Manap, N.B.M Saad and A.R Syafeeza, “Evaluation of 3D Image Reconstruction Using Silhouette Algorithm,” Research Journal of Applied Sciences, 11(11), pp.1195- 1198, 2016.

N. Azhar, W.H.M Saad, N.A., Manap ,N.M. Saad, and A.R Syafeeza, “Silhouette-based approach of 3D image reconstruction for automated image acquisition using robotic arm,” IOP Conf.Series :Materials Science and Engineering, 210 012049, 2017.

Downloads

Published

2018-07-04

How to Cite

Azhar, N., Mohd Saad, W. H., Abd. Karim, S. A., Mohd Saad, N., & Abd Manap, N. (2018). 3D Model Construction of Turntable and Robotic Arm Sequence. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10(2-6), 71–75. Retrieved from https://jtec.utem.edu.my/jtec/article/view/4372

Issue

Vol. 10 No. 2-6: Embracing The 4th Industrial Revolution: Innovation in Telecommunication, Electronic & Computer Engineering II

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.


Most read articles by the same author(s)

1 2 3 > >>