Rectangular Microstrip Patch Antenna with Different Location of Minkowski Island Split Ring Resonator (MI-SRR) Structure

Authors

  • Nornikman Hassan Centre for Telecommunication Research and Innovation (CeTRI), Faculty of Electronics and Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Melaka, Malaysia.
  • Muhammad Syafiq Noor Azizi Centre for Telecommunication Research and Innovation (CeTRI), Faculty of Electronics and Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Melaka, Malaysia.
  • Badrul Hisham Ahmad Centre for Telecommunication Research and Innovation (CeTRI), Faculty of Electronics and Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Melaka, Malaysia.
  • Mohamad Zoinol Abidin Abd. Aziz Centre for Telecommunication Research and Innovation (CeTRI), Faculty of Electronics and Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Melaka, Malaysia.
  • Hamizan Abu Bakar Centre for Telecommunication Research and Innovation (CeTRI), Faculty of Electronics and Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Melaka, Malaysia.
  • Mohamad Hafize Ramli Centre for Telecommunication Research and Innovation (CeTRI), Faculty of Electronics and Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Melaka, Malaysia.
  • Mohd Azlishah Othman Centre for Telecommunication Research and Innovation (CeTRI), Faculty of Electronics and Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Melaka, Malaysia.
  • Hamzah Asyrani Sulaiman Faculty of Information and Communication Technology, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Melaka, Malaysia.

Keywords:

Split Ring Resonator, Patch Antenna, Minkowski Island, Fractal Antenna, Return Loss,

Abstract

In this project, different locations of the Minkowski Island split ring resonator (MI-SRR) structure are embedded in the basic rectangular patch antenna. It started with a basic rectangular microstrip patch antenna that were simulated in CST Microwave Studio software. After that, four different locations (Location A, Location B, Location C and Location D) of MI-SRR were chosen to compare the performance of return loss, resonant frequency, surface current radiation pattern, and gain. Location A represented the antenna with the MI-SRR at the center part of the patch, while Location B had the MI-SRR at the upper part of the FR-4 substrate. Location C and Location D represented the antenna with MI-SRR at the ground at antenna with MI-SRR at the other layer, respectively. The return loss performances of Design of Location A, Location B, Location C, and Location D were - 26.546 dB, - 23.892 dB, -43.842 dB, - 51.506 dB at resonant frequency of 2.432 GHz, 2.510 GHz, 2.438 GHz and 2.542 GHz, respectively.

Downloads

Download data is not yet available.

Downloads

Published

2017-06-01

How to Cite

Hassan, N., Noor Azizi, M. S., Ahmad, B. H., Abd. Aziz, M. Z. A., Abu Bakar, H., Ramli, M. H., Othman, M. A., & Sulaiman, H. A. (2017). Rectangular Microstrip Patch Antenna with Different Location of Minkowski Island Split Ring Resonator (MI-SRR) Structure. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9(2-5), 13–16. Retrieved from https://jtec.utem.edu.my/jtec/article/view/2384

Most read articles by the same author(s)

<< < 1 2 3 > >>