Rectangular Patch Antenna with Notch and Slot on Ground Plate for WLAN Application

Authors

  • Mohamad Hafize Ramli Center of Telecommunication Research and Innovation (CeTRI), Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Malaysia.
  • Mohamad Zoinol Abidin Abd Aziz Center of Telecommunication Research and Innovation (CeTRI), Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Malaysia.
  • Mohd Azlishah Othman Center of Telecommunication Research and Innovation (CeTRI), Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Malaysia.
  • Siti Nurfarhanah Azizul Azlan Center of Telecommunication Research and Innovation (CeTRI), Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Malaysia.
  • Nornikman Hassan Center of Telecommunication Research and Innovation (CeTRI), Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Malaysia.
  • Muhammad Syafiq Noor Azizi Center of Telecommunication Research and Innovation (CeTRI), Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, Malaysia.
  • Abdul Halim Dahalan Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka, Malaysia.

Keywords:

Antenna, Notch, Slot, WLAN,

Abstract

A new design of rectangular patch antenna was presented in this paper. This antenna was proposed to achieve wider bandwidth and good performance in return loss (S11), that is below -10dB. The design of this antenna was an improvement from the conventional rectangular patch antenna by making a parallel slot, rectangular slot on the ground plane and introducing a notch (dual mode). The rectangular antenna was designed and simulated using CST Microwave Studio. The application of this antenna was for WLAN application at 5.25 GHz. There was a slightly different result on the bandwidth and return loss value for the simulation and measurement.

References

Zakaria, Z., Sam, W. Y., Abd Aziz, M. Z. A. and Meor Said, M. A. 2012. Rectangular Microstrip patch Antenna Based on Resonant Circuit Approach. IEEE Symposium on Wireless Technology and Application: 220-223.

Su, C. M., W. S. Chen and K. L. Wong, 2003. Compact dual-band metal plate for 2.4/5.2 GHz WLAN operation, Microwave Optical Technology Letter, 30: 113-115.

Gao, X., Zhong, H., Zhang, Z., Feng, Z. and Iskander, M. F. 2010. Lowprofile planar tripolarization antenna for WLAN communications, IEEE Trans. Antennas Wireless Propagation Letters., 9: 83-86.

Wong, K. L., Chou, L. C. and Su, C. M. 2005. Dual-band flat-plate antenna with a shorted parasicts element for laptop application, IEEE Transaction Antenna Propagation, 53:539-544.

Satthamsakul, S., Anantrasirincai, N. Benjangkaprasert C. and Wakabayashi T. 2008. Rectangular Patch Antenna with Inset Feed and Modified Ground-Plane for Wideband Antenna, University ElectroCommunications, Japan, 3400-3404.

Ahuja, N., Khanna R. and Kaur, J. 2012. Design of Single Band Rectangular Patch Antenna for WLAN Application, International Conference on Recent Advance and Future Trends in Information Technology, 29-31.

Norzeli, S.M., Ismail I. and Fazruisyam, M. B. 2012. Designing an UHF RFID Reader Antenna. IEEE Symposium on Humanities, Science and Engineering Research: 599-602.

Panda J. R. and Kshetrimayum, R. S. 2009. Notch Antenna with Triangular Tapered Feed Line For Tri-Band Operation, International Journal of Recent Trends in Engineering,1(3): 277-279.

Downloads

Published

2017-06-01

How to Cite

Ramli, M. H., Abd Aziz, M. Z. A., Othman, M. A., Azizul Azlan, S. N., Hassan, N., Noor Azizi, M. S., & Dahalan, A. H. (2017). Rectangular Patch Antenna with Notch and Slot on Ground Plate for WLAN Application. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9(2-4), 165–167. Retrieved from https://jtec.utem.edu.my/jtec/article/view/2381

Most read articles by the same author(s)

1 2 > >>