The Development Of Rectangular Waveguide Bandpass Filter

Authors

  • Badrul Hisham Ahmad
  • Noor Azwan Shairi
  • Redzuan Abdul Manap
  • Mazran Esro

Keywords:

Rectangular Waveguide, Bandpass filter

Abstract

The design and development of rectangular waveguide bandpass filter is presented in this paper. The principle of operation of the filter is that the posts act as shunt inductive discontinuities and the sections of the waveguide between the posts are half waveguide resonators. The bandpass operated at X band frequencies with 1 GHz bandwidth. Pass band is from 8 GHz to 9 GHz. Insertion loss achieved is less than 0.3 dB and return loss of more than 15 dB. Lower cut off frequency at 8 GHz is more selective than the upper cut off frequency at 10.5 GHz, which is 40dB and 20dB respectively. 3D simulator was used to model the structure and simulation results showed very good response.

Downloads

Download data is not yet available.

Downloads

How to Cite

Ahmad, B. H., Shairi, N. A., Abdul Manap, R., & Esro, M. (2009). The Development Of Rectangular Waveguide Bandpass Filter. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 1(1), 1–4. Retrieved from https://jtec.utem.edu.my/jtec/article/view/405

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>