Simulation Analysis on the Potential Application of Matched Bandstop to Bandpass Filter in Filter Integrated SPDT Switch Design

Authors

  • A. M. Zobilah Microwave Research Group (MRG), Centre for Telecommunication Research & Innovation (CeTRI), Faculty of Electronic and Computer Engineering (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia.
  • N. A. Shairi Microwave Research Group (MRG), Centre for Telecommunication Research & Innovation (CeTRI), Faculty of Electronic and Computer Engineering (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia.
  • Z. Zakaria Microwave Research Group (MRG), Centre for Telecommunication Research & Innovation (CeTRI), Faculty of Electronic and Computer Engineering (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia.
  • B. H. Ahmad Microwave Research Group (MRG), Centre for Telecommunication Research & Innovation (CeTRI), Faculty of Electronic and Computer Engineering (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia.
  • M. K. Zahari Microwave Research Group (MRG), Centre for Telecommunication Research & Innovation (CeTRI), Faculty of Electronic and Computer Engineering (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia.
  • P. W. Wong Electrical & Electronic Engineering Department, Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, 31750 Tronoh, Perak, Malaysia.

Keywords:

Filter Integrated Switch, Single Pole Double Throw, Bandstop to Bandpass, Switchable Filter

Abstract

This paper presents the simulation analysis on the potential application of matched bandstop to bandpass filter in filter integrated switch (FIS) design. The FIS consists of matched band-stop to bandpass filter integrated with single-pole-double-throw (SPDT) switch. The proposed design was demonstrated for 2.45 GHz applications in wireless data communication systems such as Bluetooth and Zigbee. The filter was based on L-shape lossy resonator, which can provide an absorptive feature. PIN diodes were used as switching elements for the SPDT switch and to reconfigure between band-stop and bandpass responses. Therefore, the key advantages of the proposed design are high isolation and good return loss at both ON- and OFF-state ports. As a result, the simulation showed the followings: higher than 10 dB of return loss and greater than 25 dB of isolation at the operation frequency.

Downloads

Download data is not yet available.

Downloads

How to Cite

Zobilah, A. M., Shairi, N. A., Zakaria, Z., Ahmad, B. H., Zahari, M. K., & Wong, P. W. (2018). Simulation Analysis on the Potential Application of Matched Bandstop to Bandpass Filter in Filter Integrated SPDT Switch Design. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10(4), 127–131. Retrieved from https://jtec.utem.edu.my/jtec/article/view/4820

Most read articles by the same author(s)

1 2 3 4 > >>