Substrate Integrated Waveguide Bandstop Filter

Authors

  • Badrul Hisham Ahmad FKEKK, UTEM
  • Ian C Hunter University of Leeds, UK

Keywords:

Component, Substrate Integrated Waveguide, Bandstop Filter, Inverse Chebychev, Lumped Element

Abstract

One new type of filter is presented in this paper. The propose filter is a transmission mode bandstop filter utilizing substrate-integratedwaveguide cavity resonators to provide the required resonance. The bandstop operated at X band frequencies with 450 MHz bandwidth. Stop band is from 8.7 GHz to 9.2 GHz. Insertion loss achieved is less than 0.5 dB and return loss of more than 15 dB. 3D simulator was used to model the structure and simulation results showed very good response. To date, this is the first time such bandstop substrate-integratedwaveguide filter has been reported

Downloads

How to Cite

Ahmad, B. H., & Hunter, I. C. (2015). Substrate Integrated Waveguide Bandstop Filter. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 2(1), 9–12. Retrieved from https://jtec.utem.edu.my/jtec/article/view/396

Issue

Vol. 2 No. 1

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.


Most read articles by the same author(s)