A Low Cost Data Acquisition for CMOS-based Optical Tomography System

Authors

  • Norain Rahim Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Wafi Aziz Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Izadora Mustaffa Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Wan Haszerila Wan Hassan Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Siti Asma Che Aziz Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia

Keywords:

CMOS Image Sensor, Data Acquisition, LPC2103, Optical Tomography,

Abstract

This paper presents the development of a portable, effective and economical Data Acquisition (DAQ) for optical tomography system. DAQ is a core unit that is essential for acquiring an accurate yield for data sampling in Tomography System. However, there are extremely limited quantities of equipment in market that can accurately implemented as DAQ for the optical tomography system. This project offers a microprocessor-based data acquisition system which able to demonstrate the output pixel of CMOS image sensor in GUI application. The project drives the control unit (LPC2103) to perform data sampling for CMOS image sensor and allocate 128x64 of data pixels into a visualized image inside the GUI application.

References

Najib, S., Idroas, M., Ibrahim, M., & Ab Ghani, M. (2015). Imaging of Solid Particle in Air using Optical Tomography based on CMOS Area Image Sensor. Indian Journal of Science and Technology, 8(13).

Ramli, N., Idroas, M., Ibrahim, M.N. and Shafei, N.H., 2013. Design of the Optical Tomography System for Four Projections CMOS Linear Image Sensor. Jurnal Teknologi, 61(2).

Ramli, N., Idroas, M., & Nasir Ibrahim, M. (2016). Hardware Development for Optical Tomography System based on Complementary Metal Oxide Semiconductor Linear Image Sensor. Indian Journal of Science and Technology, 9(28).

Idroas, M., Najib, S., & Nasir Ibrahim, M. (2016). Image Reconstruction for Optical Tomography System based on Complementary Metal Oxide Semiconductor Image Sensor. Indian Journal of Science and Technology, 9(28).

Norsuhadat Nordin, Mariani Idroas, Zainal Zakaria, M. Nasir Ibrahim, Design and Fabrication of Ultrasonic Tomographic Instrumentation System for Inspecting Flaw on Pipeline, Procedia Manufacturing, Volume 2, 2015, Pages 313-318, ISSN 2351-9789.

M. Idroas, S.M. Najib, M.N. Ibrahim, Imaging particles in solid/air flows using an optical tomography system based on complementary metal oxide semiconductor area image sensors, Sensors and Actuators B: Chemical, Volume 220, 1 December 2015, Pages 75-80, ISSN 0925-4005.

Aziz, M.A.F.A., Idroas, M., Zakaria, Z., Zin, A.R.M. and Ibrahim, M.N., 2014. The Use of Reflection Mode Ultrasonic Transceiver Sensor in Pipeline Inspection Guage to Monitor Pipeline Internal Corrosion. Jurnal Teknologi, 70(3).

Nordin, N., Idroas, M., Zakaria, Z.A. and Ibrahim, M.N., 2015. Hardware Development of Reflection Mode Ultrasonic Tomography System for Monitoring Flaws on Pipeline. Jurnal Teknologi, 73(3).

Rahim, R.A., High Speed Data Acquisition System for Computer Tomographic Imaging Instrumentation, PhD. Thesis, Universiti Teknologi Malaysia, Skudai, 2005.

Dickin F.J., Hoyle B.S., Hunt A., Huang S.M., Ilyas O., Lenn C., Waterfall R.C., Williams R.A., Xie C.G. and Beck M.S. (1992). Tomographic Imaging of Industrial Process Equipment: Techniques and Applications. Circuits, Devices and Systems, IEE Proceedings G. Volume 139, Issue 1, Feb. 1992 Page(s):72 – 82.

Idroas, M., et al., Modeling of a charge coupled device based optical tomographic instrumentation system for particle sizing. Powder Technology, 2011. 212(1): p. 25-37.

Rahim R. A. and Green R G (1997). "A Review of Tomography Sensors and Applications." Journal Electrika.

Rahim, R.A., et al. Tomographic Imaging: Multiple Fan Beam Projection Technique Using Optical Fibre Sensors. Computers, Communications, & Signal Processing with Special Track on Biomedical Engineering, 2005. CCSP 2005. 1st International Conference on. 2005.

Rahim, R.A., et al. Data Acquisition Process in Optical Tomography: Signal Sample and hold circuit. Computers, Communications, & Signal Processing with Special Track on Biomedical Engineering, 2005. CCSP 2005. 1st International Conference on. 2005.

Rahim, R.A., J.F. Pang, and K.S. Chan, Optical Tomography Sensor Configuration Using Two Orthogonal and Two Rectilinear Projection Arrays. Flow Measurement and Instrumentation, 2005. 16(5): p. 327-340.

Idroas, M., et al., Optical tomography system based on charge-coupled device linear image sensors: Particle size measurement. Sensors and Actuators B: Chemical, 2011. 156(2): p. 572-577.

Dickin F.J., Hoyle B.S., Hunt A., Huang S.M., Ilyas O., Lenn C., Waterfall R.C., Williams R.A., Xie C.G. and Beck M.S. (1992).Tomographic Imaging of Industrial Process Equipment: Techniques and Applications. Circuits, Devices and Systems, IEE Proceedings G. Volume 139, Issue 1, Feb. 1992 Page(s):72 - 82.

Pang, J. F., R. Abdul Rahim, and K. S. Chan. "Real time image reconstruction system using two data processing unit in optical tomography." Proceeding 3rd International Symposium on Process Tomography in Lodz, Poland. 2004.

Huang, Z. and H. Li. CMOS Sensor Sequences Designing of HighSpeed Image Acquisition System Based on FPGA in Computational Intelligence and Software Engineering, 2009. CiSE 2009. International Conference 2009.

Bei, Y., et al. Design of CMOS Image Acquisition System Based On FPGA. Industrial Electronics and Applications (ICIEA), 2011 6th IEEE Conference on. 2011.

M. Idroas, S.M. Najib, M.N. Ibrahim, Imaging Particles In Solid/Air Flows Using An Optical Tomography System Based On Complementary Metal Oxide Semiconductor Area Image Sensors. Sensors and Actuators B: Chemical, Volume 220, 4 June 2015, Pages 75-80, ISSN 0925-4005.

Blanksby, A.J., et al. Noise Performance of a Color CMOS Photogate Image Sensor. Electron Devices Meeting, 1997. IEDM '97. Technical Digest. International. 1997.

Kyeong-Yuk, M. and C. Jong-Wha. A real-time JPEG encoder for 1.3 mega pixel CMOS image sensor SoC. Industrial Electronics Society, 2004. IECON 2004. 30th Annual Conference of IEEE. 2004 Symposium on Process Tomography in Poland, 2004, 52-55

Downloads

Published

2017-09-01

How to Cite

Rahim, N., Aziz, W., Mustaffa, I., Wan Hassan, W. H., & Che Aziz, S. A. (2017). A Low Cost Data Acquisition for CMOS-based Optical Tomography System. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9(2-7), 13–18. Retrieved from https://jtec.utem.edu.my/jtec/article/view/2585

Issue

Vol. 9 No. 2-7: Towards Creative and Innovative Technologies for Humankind I

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.


Most read articles by the same author(s)