A Study on the EBG and AMC on Radial Line Slot Array Structure at 28 GHz

Authors

  • R.A.A. Kamaruddin Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia
  • I.M. Ibrahim Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia
  • N.A.M. Nor Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia
  • S.A.M. Yusoff Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia
  • Z Zakaria Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia
  • N.A. Shairi Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia
  • M. Abu Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia
  • T.A. Rahman Wireless Communication Centre (WCC), Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia

Keywords:

Radial Line Slot Array antenna, Millimeter wave, 28 GHz, EBG, AMC, Air Gap Cavity Structure,

Abstract

This paper is a study on the electromagnetic band gap (EBG) and artificial magnetic conductor (AMC) on the radial line slot array (RLSA) antenna structure at a frequency of 28 GHz. The RLSA antenna is known based on its characteristic which has high gain, durable, simple structures, high efficiency and low cost of fabricating. This project is focusing on the study of the RLSA antenna with the Electromagnetic Band Gap (EBG) and Artificial Magnetic Conductor (AMC) with analyzes the effect of number EBG and AMC structures applied to the antenna. It enhances the performances of the RLSA antenna before the EBG structure is added. This may be due to eliminating the several numbers of slots on the radiating plate is the reason for the present number of EBG structures applied to it. The lowest value of S11 for eight (8) units EBG is -41.4686 dB at a frequency of 29.86 GHz, the directivity value is 25.60 dBi and realizes a gain of 25.26 dB at a frequency of 28 GHz. While the AMC structure can reduce the side lobes from -2.7 dB for nonelement of AMC to -1.7 dB for eight (8) and nine (9) elements. This RLSA antenna with AMC and EBG produces high directivity which is 26.10 dBi compared to conventional RLSA antenna which is 21.70 dBi. This antenna can also be used as widely applications such as RADAR and satellite communication.

References

T. X. Nguyen, R. S. Jayawardene, Y. Takano, K. Sakurai, T. Hirano, J. Hirokawa, M. Ando, O. Amano, S. Koreeda and T. Matsuzaki. “Study of a high gain RLSA Antenna in Ka-band for space uses,” In Proceedings of the 2013 International Symposium on Electromagnetic Theory, pp 611-613, 2013.

J. Suryana and D. B. Kusuma, “Design and implementation of RLSA antenna for mobile DBS application in Ku-band downlink direction,” IEEE [The 5TH International Conference on Electrical Engineering and Informatics, Bali, Indonesia, 2015], pp 341-345, Aug. 2015.

W. A. W. Muhamad, T. A. Rahman and M. F. Jamlos. “The effects of air gap on spider radial line slot array (SRLSA) antenna for point to point application,” IEEE Symposium on Wireless Technology and Applications (ISWTA), Kuching, Malaysia, pp 388-390, Sep. 2013.

I. M. Ibrahim, T. A. Rahman, S. Z. Illiya and M. I. Sabran, “Aperture slot size effect to wide band open air gap radial line slot array performance,” IEEE Microwave and Optical Technology Letters, vol. 56, pp. 2974-2978, Dec. 2014.

I. M. Ibrahim,T.A. Rahman, M.I. Sabran and M. F. Jamlos. “Bandwidth enhancement through slot design on RLSA performance,” IEEE, pp 228-231, 2014.

I. M. Ibrahim, T. A. Rahman, M. I. Sabran, U. Kesavan and T. Purnamirza. “Wide band open ended air gap RLSA antenna at 26 GHz frequency band,” PIERS Proceeding, Taipei, Mar. 2013, pp 470- 474.

J. Bai, J. Lin and J. Hu. “The optimization of Radial Line Slot Antenna,” IEEE Transactions on Antennas and Propagation, pp 714- 717, 2013.

I. Maina, T. A. Rahman and M. Khalily, “ Bandwidth enhanced and sidelobes level reduced radial line slot array antenna at 28 GHz for 5G next generation mobile communication,” ARPN journal of engineering and applied sciences, vol. 10, no. 10, pp 5752-5757, Aug. 2015.

M. Ibrahim, T.A.Rahman, M. Khalily, “Influence Of Dielectric Materials Arrangement In Multilayered Cavity Material Radial Line Slot Array Antenna,” Akademia Baru, 2017, pp 1-7.

M. Su, L. Yuan and Y. Liu, “A Linearly Polarized Radial Line Dielectric Resonator Antenna Array,” IEEE Antennas and Wireless Propagation Letters, 2017, pp 788-791.

M. S. Wartak, K. L. Tsakmakidis and O. Hess, “Introduction to Metamaterials,” 2011, pp 5752-5757.

Y. Dong and T. Itoh, “Metamaterial based antennas,”Proceedings of the IEEE, 2012, pp 2271-2285.

J. C. Iriarte, A. Tellechea, I. Ederra and R. Gonzalo, “ Metamaterials for Antennas ad RCS Reduction Structures,” 2013.

D. M. N.lsheakh, H. A. Elsadek and E. A. Abdallah, “Antenna Designs with Electromagnetic Band Gap Structures,”intechopen.com, 2012, pp 403-474. doi:10.5772/37222

F. Yang and Y. Rahmat-Samii, “EBG Characterizations and Classifications,” Electromagnetic Band Gap Structures in Antenna Engineering, 2017, pp 59-86. doi: 10.1017/cbo9780511754531.004

F. Yang and Y. Rahmat-Samii, “Designs and Optimizations of EBG Structures,” Electromagnetic Band Gap Structures in Antenna Engineering, 2017, pp 87-126. doi: 10.1017/cbo9780511754531.005

S. Gnanasundar and K. U. Kiran, “Study of Electromagnetic Band Gap Structures for Antenna Application,” 3rd International Conference on Signal Processing, Communication and Networking (ICSCN), 2015, pp 1-4. doi:10.1109/ICSCN.2015.7219905

J. Fernandes and M. Castaner, “Effect of AMC Sidewalls Structures in Parallel Plate Slot Antennas,” 2005 IEEE Antennas and Propagation Society International Symposium, 2005.doi:10.1109/aps.2005.1552099

A. Munir and O.L. Nur, “Bandwidth Improvement of Square Patch Array Based AMC using Multiple Slots Techniques,” 2015 International Confrerence on Information and Communication Technology (ICoICT), 2015.doi:10.1109/icoict.015.7231412

M.N.M. Kehn, A. Faroozesh and L. Shafai, “Parametric Studies of High Impedance AMC Surfaces Realized by Periodic Array of Arbitrarily Shaped Metallizations Printed over Grounded Dielectric Substrates,” 2008 IEEE Antennas and Propagation Society International Symposium, 2008, pp 978-981.

Downloads

Published

2018-07-04

How to Cite

Kamaruddin, R., Ibrahim, I., Nor, N., Yusoff, S., Zakaria, Z., Shairi, N., Abu, M., & Rahman, T. (2018). A Study on the EBG and AMC on Radial Line Slot Array Structure at 28 GHz. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10(2-6), 129–134. Retrieved from https://jtec.utem.edu.my/jtec/article/view/4382

Issue

Vol. 10 No. 2-6: Embracing The 4th Industrial Revolution: Innovation in Telecommunication, Electronic & Computer Engineering II

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.


Most read articles by the same author(s)

1 2 3 > >>