A Study on the EBG and AMC on Radial Line Slot Array Structure at 28 GHz
Keywords:
Radial Line Slot Array antenna, Millimeter wave, 28 GHz, EBG, AMC, Air Gap Cavity Structure,Abstract
This paper is a study on the electromagnetic band gap (EBG) and artificial magnetic conductor (AMC) on the radial line slot array (RLSA) antenna structure at a frequency of 28 GHz. The RLSA antenna is known based on its characteristic which has high gain, durable, simple structures, high efficiency and low cost of fabricating. This project is focusing on the study of the RLSA antenna with the Electromagnetic Band Gap (EBG) and Artificial Magnetic Conductor (AMC) with analyzes the effect of number EBG and AMC structures applied to the antenna. It enhances the performances of the RLSA antenna before the EBG structure is added. This may be due to eliminating the several numbers of slots on the radiating plate is the reason for the present number of EBG structures applied to it. The lowest value of S11 for eight (8) units EBG is -41.4686 dB at a frequency of 29.86 GHz, the directivity value is 25.60 dBi and realizes a gain of 25.26 dB at a frequency of 28 GHz. While the AMC structure can reduce the side lobes from -2.7 dB for nonelement of AMC to -1.7 dB for eight (8) and nine (9) elements. This RLSA antenna with AMC and EBG produces high directivity which is 26.10 dBi compared to conventional RLSA antenna which is 21.70 dBi. This antenna can also be used as widely applications such as RADAR and satellite communication.Downloads
Published
How to Cite
Issue
Section
License
TRANSFER OF COPYRIGHT AGREEMENT
The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):
- All proprietary right other than copyright, such as patent rights
- The right to make further copies of all or part of the published article for my use in classroom teaching
- The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
- The right to make copies of the published work for internal distribution within the institution that employs me
I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.