Parametric Study of Modified U-shaped Split Ring Resonator Structure Dimension at Ultra-Wide-band Monopole Antenna
Keywords:
Parametric Study, Band-Notch, Split Ring Resonator, Return Loss, UWB Antenna,Abstract
This paper discusses the parametric study work Ushaped split ring resonator (SRR) structure effect on the ultrawide-band (UWB) monopole. Five different stages are done, consisted from Design A to Design E, with three stages are considered with parametric study – Design B, Design C, and Design D. Firstly, Design A represent the basic UWB monopole antenna without SRR structure while the last design, Design E shows the proposed UWB monopole antenna with modified SRR structure. The Design E successfully resonate at first resonant frequency of 6.272 GHz with return loss performance of – 25.91 dB while resonate at second resonant frequency at 7.82 GHz with a return loss of – 26.165 dB. This antenna operates at UWB range frequency from 2.572 GHz to 10.746 GHz of with bandwidth performance of 8.174 GHz. It shows that a 0.972 GHz range of band-notch frequency bandwidth, starting with 5.028 GHz to 6.0 GHz.Downloads
Published
How to Cite
Issue
Section
License
TRANSFER OF COPYRIGHT AGREEMENT
The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):
- All proprietary right other than copyright, such as patent rights
- The right to make further copies of all or part of the published article for my use in classroom teaching
- The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
- The right to make copies of the published work for internal distribution within the institution that employs me
I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.