Electrical Characterizations of Polypyrrole Thin Film Deposited on Glass Surfaces by Using the LCR Meter

Authors

  • N. Syamimi Biomedical Electronic Engineering Program, School of Mechatronic Engineering, Universiti Malaysia Perlis, 02600, UluPauh, Perlis, MALAYSIA
  • S. Yahud Biomedical Electronic Engineering Program, School of Mechatronic Engineering, Universiti Malaysia Perlis, 02600, UluPauh, Perlis, MALAYSIA

Keywords:

Capacitance, Conductivity, Inductance, LCR Meter, Polypyrrole (Ppy) Thin Film, Resistance, Resistivity,

Abstract

The electrical characterization of Polypyrrole (PPy) thin films is investigated as a function of various thin film thickness. Ten sets of uniform PPy thin films with different layers were prepared by using the spin coating method applied on glass substrates treated with oxygen plasma. The electrical resistance, inductance, conductance of the films was observed as a function of film thickness at room temperature. These parameters have been measured by using the LCR meter. The behavior of the PPy thin film’s resistance was then interpreted in terms of resistivity and conductivity. The results showed that as the thickness of the thin film increase, the resistivity decrease thus increasing its conductivity.

Downloads

Download data is not yet available.

Downloads

Published

2018-05-31

How to Cite

Syamimi, N., & Yahud, S. (2018). Electrical Characterizations of Polypyrrole Thin Film Deposited on Glass Surfaces by Using the LCR Meter. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10(1-17), 69–71. Retrieved from https://jtec.utem.edu.my/jtec/article/view/4169

Issue

Vol. 10 No. 1-17: Recent Trends in Biomedical Engineering Systems and Technologies II

Section

Articles

License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)