On the Modeling of Automatic Gain Control in SPICE

Authors

  • J. Vavra Dept. of Electrical Engineering, University of Defence, Kounicova 65, 662 10 Brno, Czech Republic.
  • J. Bajer Dept. of Electrical Engineering, University of Defence, Kounicova 65, 662 10 Brno, Czech Republic. Dept. of Aerospace Electrical Systems, University of Defence, Kounicova 65, 662 10 Brno, Czech Republic

Keywords:

Automatic Gain Control, SPICE Simulation, Sinusoidal Oscillator,

Abstract

Design process of any electronic analog application comprise several steps. One of the essential steps is a computer simulation, usually performed via SPICE or similar simulation software. When the application being designed is a sinusoidal oscillator, the whole task is little bit different, because besides the oscillator circuit, it is also necessary to consider Automatic Gain Control (AGC) circuitry. The paper is focused on a novel and effective way on how to simulate AGC circuitry during the design of a sinusoidal oscillator.

Downloads

Download data is not yet available.

Downloads

Published

2017-09-01

How to Cite

Vavra, J., & Bajer, J. (2017). On the Modeling of Automatic Gain Control in SPICE. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9(2-7), 187–190. Retrieved from https://jtec.utem.edu.my/jtec/article/view/2617

Issue

Vol. 9 No. 2-7: Towards Creative and Innovative Technologies for Humankind I

Section

Articles

License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)