Fuzzy Logic Speed Controller Implementation to A Supercapacitor Based-Regenerative Brake System
Keywords:
Regenerative Brake System, Fuzzy Logic, DC Moto, Energy, Supercapacitor,Abstract
During the braking process, the efficiency for the electric vehicles is improved through the recovery of energy by the regenerative brake system. The mechanical energy is lost and converted to heat when the conventional contact brake system is used. In this study, fuzzy-logic speed controller for a regenerative brake system using supercapacitors was designed, prototyped and tested. The prototype is mainly composed of a suspended wheel driven by a DC motor whose speed is varied and controlled through fuzzy logic algorithm. This study aimed at improving and maintaining the speed of the wheel to a setpoint as compared with an open-loop system. This study also aimed to compare the performance of the proposed system that utilizes supercapacitor bank against a conventional system that uses a battery based on the recovered energy and the braking time. According to the experimental results, the proposed system improved its speed control through the fuzzy logic method as compared against an open-loop system. The data also showed that the proposed system using supercapacitor bank is significantly better in energy recovery and braking compared to the conventional system using a battery. On the average, the system using battery achieved 4.81% reduction in stopping time, while the system using supercapacitor achieved 30.29% in reducing the stopping time of the wheel during coasting. In a single braking, the average recovered energy using the battery is 0.01 J while 0.69 J of energy is recovered using the supercapacitor bank. Therefore, the system using supercapacitor recovered an average of 0.68 J more energy than using a battery in a single braking.Downloads
Published
How to Cite
Issue
Section
License
TRANSFER OF COPYRIGHT AGREEMENT
The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):
- All proprietary right other than copyright, such as patent rights
- The right to make further copies of all or part of the published article for my use in classroom teaching
- The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
- The right to make copies of the published work for internal distribution within the institution that employs me
I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.