Optimizing the Design Of Beam Squinted RLSA at 5.8GHz Frequency Band

Authors

  • Imran Mohd Ibrahim
  • Tharek Abdul Rahman
  • Wan Khairuddin Wan Ali
  • Hasnain Abdullah

Keywords:

Radial Line Slot Array Antenna, antenna performance, beam squinted design

Abstract

The Radial Line Slot Array (RLSA) Antenna is known for its good characteristics such as low profile, low cost, aesthetically pleasing, ease of installation and simple structure. This research involves the optimization of the design and development of a novel linearly polarized Beam Squinted Radial Line Slot Array (RLSA) Antenna at 5.8 GHz band. The research objective is to study the optimum size of the antenna that can give an acceptable antenna’s performance. There are four prototypes with different sizes which have been developed and the measurements obtained indicate a return loss at 17.12 dB, antenna gain of 21 dB and 18.80% antenna bandwidth with 63.10% radiation efficiency for the 400mm diameter antenna design

Downloads

How to Cite

Mohd Ibrahim, I., Abdul Rahman, T., Wan Ali, W. K., & Abdullah, H. (2015). Optimizing the Design Of Beam Squinted RLSA at 5.8GHz Frequency Band. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 1(1), 11–15. Retrieved from https://jtec.utem.edu.my/jtec/article/view/504

Issue

Vol. 1 No. 1

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.


Most read articles by the same author(s)