The Effect of Quarter-Wave Transformer Matching Network to the X-Circular Polarized Antenna

Authors

  • M.Z.A Zainal Abidin
  • N.A.A Mufit
  • M.K Suaidi
  • M.K A.Rahim

Keywords:

circular polarized, x-circular polarized, quarter-wave transformer, microstrip antenna

Abstract

This technical paper presents the 2 design of xcircular polarized with slanted rectangular slot microstrip patch antenna by using single port in X-form is at 45 0 , 135 0 , 225 0 and 315 0 . The combination of 4 circular patches of Design 1 and the additional of quarter wave impedance matching technique for Design 2 have been used to design the X-circular polarized with slanted rectangular slot microstrip patch antenna. The designs are simulated using Computer Simulation Technology (CST) with dielectric constant, εr =4.3 and tan δ=0.019 and thickness of substrate, t=1.6mm. The simulation results such as return loss, bandwidth, gain, directivity and polarization have been compared

Downloads

How to Cite

Zainal Abidin, M., Mufit, N., Suaidi, M., & A.Rahim, M. (2015). The Effect of Quarter-Wave Transformer Matching Network to the X-Circular Polarized Antenna. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 5(1), 9–13. Retrieved from https://jtec.utem.edu.my/jtec/article/view/479

Issue

Vol. 5 No. 1

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.