Torque Studies of 6 Slot-7 Pole Motor for Hybrid Motor

Authors

  • I.I. Ibrahim School of Mechatronic Engineering, Universiti Malaysia Perlis (UniMAP), Kampus Pauh Putra, 02600 Arau, Perlis.
  • E. Sulaiman Universiti Tun Hussein Onn Malaysia.

Keywords:

HEFSM, HEMs, HEV, Hybrid Motor,

Abstract

Hybrid excitation machines (HEMs) that consist of permanent magnet (PM) and field excitation coil (FEC) as their main flux sources has several attractive features compared to interior permanent magnet synchronous machines (IPMSM) conventionally employed in hybrid electric vehicles (HEVs). Hybrid excitation flux switching machines (HEFSM) is one type of HEMs. This is to decrease the PM size in a HEFSM so that the cost of the machine can be reduced. By reducing the size of PM, the torque and the power of the machine will be slightly different from the original PM size. The torque is almost the same as the original sized PM but the size is successfully reduced.

References

E. Sulaiman, M. Z. Ahmad, Z. A. Haron, and T. Kosaka, “Design studies and performance of HEFSM with various slot-pole combinations for HEV applications,” PECon 2012 - 2012 IEEE Int. Conf. Power Energy, no. December, pp. 424–429, 2012.

L. Vido, S. De Cachan, and R. De Gisy, “Hybrid Excitation Synchronous Machines : Energy Efficient Solutions for Vehicle Propolsion,” 2006 IEEE Veh. Power Propuls. Conf., pp. 1–6, 2006.

C. Z. C. Zhao and Y. Y. Y. Yan, “A review of development of hybrid excitation synchronous machine,” Proc. IEEE Int. Symp. Ind. Electron. 2005. ISIE 2005., vol. 2, pp. 857–862, 2005.

R. L. Owen, Z. Q. Zhu, and G. W. Jewell, “Hybrid Excited FluxSwitching Permanent Magnet Machines,” IEEE Trans. Magn., vol. 46, no. 6, pp. 1726–1729, 2010.

Y. Liao, F. Liang, and T. A. Lipo, “A novel permanent magnet motor with doubly salient structure,” Conf. Rec. - IAS Annu. Meet. (IEEE Ind. Appl. Soc., vol. 1992–Janua, no. 5, pp. 308–314, 1992.

K. T. Chau, M. Cheng, and C. C. Chan, “Nonlinear magnetic circuit analysis for a novel stator doubly fed doubly salient machine,” IEEE Trans. Magn., vol. 38, no. 5 I, pp. 2382–2384, 2002.

E. Sulaiman, M. Z. Ahmad, T. Kosaka, and N. Matsui, “Design optimization studies on high torque and high power density hybrid excitation flux switching motor for HEV,” Procedia Eng., vol. 53, no. June, pp. 312–322, 2013.

E. Sulaiman, T. Kosaka, and N. Matsui, “Design optimization of 12slot-10pole hybrid excitation flux switching synchronous machine with 0.4kg permanent magnet for hybrid electric vehicles,” 8th Int. Conf. Power Electron. - ECCE Asia "Green World with Power Electron. ICPE 2011-ECCE Asia, pp. 1913–1920, 2011.

E. Sulaiman, T. Kosaka, N. Matsui, and M. Z. Ahmad, “Design improvement and performance analysis of 12Slot-10Pole permanent magnet flux switching machine with field excitation coils,” 2011 5th Int. Power Eng. Optim. Conf. PEOCO 2011 - Progr. Abstr., no. June, pp. 202–207, 2011.

Downloads

Published

2018-05-30

How to Cite

Ibrahim, I., & Sulaiman, E. (2018). Torque Studies of 6 Slot-7 Pole Motor for Hybrid Motor. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10(1-14), 87–90. Retrieved from https://jtec.utem.edu.my/jtec/article/view/3998

Issue

Vol. 10 No. 1-14: Exploring Man-Machines Compliance in Sensors and Control Systems

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.