The Potential Development of Oxygen Optical Fibre Gas Sensor for Automotive Industry

Authors

  • A. R. Zul Rasyied FTeK, Universiti Malaysia Pahang, Gambang, Malaysia.
  • N. N. Mazlee FTeK, Universiti Malaysia Pahang, Gambang, Malaysia.
  • M.R. Salim FKEE, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.
  • S. Nurulain FTeK, Universiti Malaysia Pahang, Gambang, Malaysia.
  • H. Manap FTeK, Universiti Malaysia Pahang, Gambang, Malaysia.

Keywords:

Optical Sensor, Open Path, Oxygen Sensor, Oxygen Spectrum,

Abstract

This paper describes the potential future development of an optical fibre based sensor for oxygen detection in the UV region between 200-230 nm. An open-path optical method is used to analyze the absorption lines of the oxygen in the UV region. Experimental result describing the operation of the sensor is presented. A comparison between theoretical and experimental results has been carried out and reported.

Downloads

Download data is not yet available.

Downloads

Published

2018-01-22

How to Cite

Zul Rasyied, A. R., Mazlee, N. N., Salim, M., Nurulain, S., & Manap, H. (2018). The Potential Development of Oxygen Optical Fibre Gas Sensor for Automotive Industry. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10(1-3), 1–4. Retrieved from https://jtec.utem.edu.my/jtec/article/view/3476

Issue

Vol. 10 No. 1-3: Moving Towards Industry 4.0 II

Section

Articles

License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)