Design and Impedance Modeling of Complementary Circular Loop FSS at 2.4 GHz

Authors

  • Mohamad Zoinol Abidin Abd Aziz Center for Telecommunication Research and Innovation (CeTRI), Faculty of Electronic & Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya 76100, Durian Tunggal, Melaka, Malaysia.
  • Farhana Abu Hussin Center for Telecommunication Research and Innovation (CeTRI), Faculty of Electronic & Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya 76100, Durian Tunggal, Melaka, Malaysia.
  • Badrul Hisham Ahmad Center for Telecommunication Research and Innovation (CeTRI), Faculty of Electronic & Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya 76100, Durian Tunggal, Melaka, Malaysia.
  • Mohamad Kadim Suaidi Center for Telecommunication Research and Innovation (CeTRI), Faculty of Electronic & Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya 76100, Durian Tunggal, Melaka, Malaysia.
  • Noor Azamiah Md Fauzi Center for Telecommunication Research and Innovation (CeTRI), Faculty of Electronic & Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya 76100, Durian Tunggal, Melaka, Malaysia.

Keywords:

Circular Loop, Frequency Selective Surface (FSS), Reflection Coefficient (S11), Transmission Coefficient (S21), Complementary Techniques,

Abstract

This paper presents the design of a circular loop for Frequency Selective Surfaces (FSS) based on complementary techniques for 2.4GHz application. The design of circular loop FSS is simulated using CST Microwave Studio software. The simulation process is based on the characteristics of the reflection coefficient (S11) and transmission coefficient (S21) of the FSS. In this paper, there are two designs that have been presented, namely Design A, which is double circle loop in horizontal axes and Design B is double circle loop in horizontal axes using complementary techniques. It was found that the best performance of the FSS is Design B in terms of return loss and bandwidth. The return loss for Design B is -29.13dB and the bandwidth is 0.39211 GHz at a frequency range from 2.2012 GHz to 2.5933 GHz.

Downloads

Download data is not yet available.

Downloads

Published

2017-04-01

How to Cite

Abd Aziz, M. Z. A., Abu Hussin, F., Ahmad, B. H., Suaidi, M. K., & Md Fauzi, N. A. (2017). Design and Impedance Modeling of Complementary Circular Loop FSS at 2.4 GHz. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9(1-5), 115–118. Retrieved from https://jtec.utem.edu.my/jtec/article/view/1847

Issue

Vol. 9 No. 1-5: Smart City Technology in Communication and Computer Engineering III

Section

Articles

License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)