Compact Wrench-Shaped Resonator Loaded UWB Antenna with Notched Frequency Characteristics

Authors

  • Md. Moinul Islam Space Science Centre, Deparment of Electrical, Electronic & Systems Engineering, Universiti Kebangsaan Malaysia, Selangor D. E., Malaysia
  • Mohammad Tariqul Islam Deparment of Electrical, Electronic & Systems Engineering, Universiti Kebangsaan Malaysia, Selangor D. E., Malaysia
  • Mohammad Rashed Iqbal Faruque Space Science Centre, Deparment of Electrical, Electronic & Systems Engineering, Universiti Kebangsaan Malaysia, Selangor D. E., Malaysia
  • Sikder Sunbeam Islam Space Science Centre, Deparment of Electrical, Electronic & Systems Engineering, Universiti Kebangsaan Malaysia, Selangor D. E., Malaysia
  • Norbahiah Misran Deparment of Electrical, Electronic & Systems Engineering, Universiti Kebangsaan Malaysia, Selangor D. E., Malaysia

Abstract

In the manuscript, the design of a wrench-shaped resonator loaded ultra-wideband (UWB) antenna has been proposed using notched frequency characteristics. The antenna is composed of the patch with microstrip feed line, a wrench-shaped resonator, and a slotted partial ground plane. A notched frequency is created due to the electromagnetic coupling of wrench-shaped resonator. In order to observe the effects of wrench-shaped resonator, a parametric study has been executed. Measured results are compared with simulations (with and without notched bands) and a stable similarity has been observed. The surface current, radiation patterns and the impedance (imaginary and real) have ensured the compression of wanted notched frequency bands

References

Jie, X., Shen, D., Zhang, X., and Wu, K.,“A compact disc ultrawideband (UWB) antenna with quintuple band rejections,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 1517-1520, 2012.

Zhang, J., Cao, P., Huang, Y., Alrawashdeh, R., and Zhu, X., “Compact planar ultra-wideband antenna with quintuple band-notched characteristics,” IET Microwaves, Antennas & Propagation, vol. 9, no. 3, pp. 206-216, 2014.

Islam, M.M., Islam, M.T., Samsuzzaman, M., and Faruque, M.R.I., “Five band‐notched ultrawide band (UWB) antenna loaded with C‐shaped slots,” Microwave and Optical Technology Letters, vol. 57, no. 6, pp. 1470-1475, 2015.

Liu, J.J., Esselle, K.P., Hay, S.G., and Zhong, S., “Planar ultra-wideband antenna with five notched stop bands,” Electronics Letters, vol. 49, no. 9, pp. 579-580, 2013.

Li, L., Zhou, Z.-L., and Hong, J.-S., “Compact UWB antenna with four band-notches for UWB applications,” Electronics letters, 2011, vol. 47, no. 22, pp. 1211-1212, 2011.

Sung, Y., “Quad band-notched ultrawideband antenna with a modified H-shaped resonator,” Microwaves, Antennas & Propagation, IET, vol. 7, no. 12, 2013.

Xu, J., Shen, D., Zheng, J., Zhang, X., and Wu, K., “A novel miniaturized UWB antenna with four band‐notches,” Microwave and Optical Technology Letters, vol. 55, no. 6, pp. 1202-1206, 2013.

Wu, Z.H., Wei, F., Shi, X.-W., and Li, W.-T., “A compact quad bandnotched UWB monopole antenna oaded one lateral L-shaped slot,”Progress In Electromagnetics Research, vol. 139, pp. 303-315, 2013.

Sarkar, D., Srivastava, K.V., and Saurav, K., “A compact microstrip-fed triple band-notched UWB monopole antenna,” Antennas and Wireless Propagation Letters, IEEE, vol. 13, pp. 396-399, 2014.

Natarajamani, S., Behera, S.K., and Patra, S.K., “A triple band-notched planar antenna for UWB applications,” Journal of Electromagnetic Waves and Applications, vol. 27, vo. 9, pp. 1178-1186, 2013.

Sung, Y., “Triple band-notched UWB planar monopole antenna using a modified H-shaped resonator,” Antennas and Propagation, IEEE Transactions on, vol. 61, no. 2, pp. 953-957, 2013.

Azim, R., Islam, M., Mandeep, J., and Mobashsher, A., “A planar circular ring ultra-wideband antenna with dual band-notched characteristics,” Journal of Electromagnetic Waves and Applications, vol. 26, no.14-15, pp. 2022-2032, 2012.

Siddiqui, J.Y., Saha, C., and Antar, Y.M., “Compact Dual-SRR-Loaded UWB Monopole Antenna With Dual Frequency and Wideband Notch Characteristics,” Antennas and Wireless Propagation Letters, IEEE, vol. 14, pp. 100-103, 2015.

Azim, R., and Islam, M.T., “Compact planar UWB antenna with band notch characteristics for WLAN and DSRC,” Progress In Electromagnetics Research, vo. 133, pp. 391-406, 2013.

Siddiqui, J.Y., Saha, C., and Antar, Y.M., “Compact SRR loaded UWB circular monopole antenna with frequency notch characteristics, ”Antennas and Propagation, IEEE Transactions on, vol. 62, no. 8, pp. 4015-4020, 2014.

Aldhaheri, R.W., Babu, K.J., Syed, A., and Sheikh, M.M., “A novel UWB rectangular slot disk monopole antenna with band‐notch characteristics,” Microwave and Optical Technology Letters, vol. 57, no.10, pp. 2405-2410, 2015.

Lin, Y.-C., and Hung, K.-J.: ‘Compact ultrawideband rectangular aperture antenna and band-notched designs,” Antennas and Propagation, IEEE Transactions on, vol. 54, no.11, pp. 3075-3081, 2006.

Liu, H.-W., Ku, C.-H., Wang, T.-S., and Yang, C.-F., “Compact monopole antenna with band-notched characteristic for UWB applications,” Antennas and Wireless Propagation Letters, IEEE, vol. 9, pp. pp. 397-400, 2010.

Downloads

Published

2016-06-01

How to Cite

Islam, M. M., Islam, M. T., Iqbal Faruque, M. R., Islam, S. S., & Misran, N. (2016). Compact Wrench-Shaped Resonator Loaded UWB Antenna with Notched Frequency Characteristics. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 8(3), 85–88. Retrieved from https://jtec.utem.edu.my/jtec/article/view/1007

Issue

Vol. 8 No. 3: Emerging Technologies in Communication and Computer Engineering for Smart City Applications I

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.