RFID Based Inspection System for Assembly Operation

Authors

  • L. Abdullah FKM, UTEM
  • Z. Jamaludin FKM, UTEM
  • M.N A.Rosli FKM, UTEM

Keywords:

RFID Inspection System, Product assembly, RF Field Characterization

Abstract

This paper is called RFID based for Inspection System for assembly operation. The Radio Frequency Identification Method (RFID) system is used in developing an inspection system to inspect the assembly product by defining the correct amount and right components that have been assembled. The system consists of the RFID system driven by PC, conveyor and external devices such as indicator lamp, press button, and buzzer that driven by a programmable logic controller (PLC). The RFID system will read the data of tags that have been attached to the parts of product when the product passes through the RFID reader. The data will be read by the Visual Basic (VB) interfacing software on PC and will be compared with the saved standard data. The product is considered accepted if the data is matching with the standard data while the product will be considered reject if there are unequal numbers of parts or wrong component being assembled. The warning system that consists of indicator lamp and buzzer will be activated when the product is rejected. Performance analysis of the read range of the reader and relationship between selected materials of parts is conducted to estimate the effectiveness of integration of RFID into the inspection system

Downloads

Download data is not yet available.

Downloads

How to Cite

Abdullah, L., Jamaludin, Z., & A.Rosli, M. (2010). RFID Based Inspection System for Assembly Operation. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 2(1), 19–25. Retrieved from https://jtec.utem.edu.my/jtec/article/view/401

Issue

Section

Articles