Energy Meter for Charging Stand in Smart Buildings

Authors

  • Z. Slanina VSB-TU Ostrava, 17. Listpadu 15, 70833, Ostrava-Poruba, Czech Republic.
  • T. Docekal VSB-TU Ostrava, 17. Listpadu 15, 70833, Ostrava-Poruba, Czech Republic.

Keywords:

Energy Meter, Electric Car, Smart Metering, FreeRTOS, Pseudo Parallelism,

Abstract

This paper describes the design of smart energy meter and its = implementation, focusing on its firmware, which is based on real time operating system FreeRTOS. The main areas to use this energy meter are charging stations (stands) for electric vehicle (follows as EV) charging support and possible embedding into current smart building technology. This paper also presents the results of a research of commercial devices available in Czech Republic for energy measuring for buildings as well as the analysis of energy meter for specific purposes. For example, the description of the module includes the required measurement of voltage, electric current and frequency of power network. After integration into smart buildings (home automation, parking houses). there are pros and cons of such solutions mentioned.

References

Misak, S. and Prokop, L., "Off-grid power systems," 9th Conference on Environment and Electrical Engineering, EEEIC 2010 , 14-17 (2010).

Ozana, S., Pies, M., Hajovsky, R., Koziorek, J., and Horacek, O., "Application of pil approach for automated transportation center," Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) 8838, 501-513 (2014).

Bradac, Z., Kaczmarczyk, V., and Fiedler, P., "Optimal scheduling of domestic appliances via milp," Energies 8(1), 217-232 (2015).

Lesek, F., Ladislav, S., and Zdenek, B., "Modelling transmission lines for the purpose of data transmission over power lines," Procedia Engineering 100(January), 1381-1388 (2015).

Prokop, L. and Misak, S., "Off - grid energy concept of family house," Proceedings of the 13th International Scientic Conference Electric Power Engineering 2012, EPE 2012 2, 753-758 (2012).

Friedrischkova, K., Vala, D., and Horak, B., "Accumulation system of electric vehicle and its secondary exploitation," IYCE 2015 -Proceedings: 2015 5th International Youth Conference on Energy (2015).

Friedrischkova, K., Vala, D., and Horak, B., "The use an electric vehicle as a power source," ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings 1, 164-170 (2015).

Idzkowski, A., Leoniuk, K., Walendziuk, W., and Budzynski, L., "Monitoring and control system of charging batteries connected to a photovoltaic panel," Proceedings of SPIE - The International Society for Optical Engineering 9662 (2015).

Idzkowski, A., Walendziuk, W., and Borawski, W., "Analysis of the temperature impact on the performance of photovoltaic panel," Proceedings of SPIE - The International Society for Optical Engineering 9662 (2015).

Kaczmarczyk, V., Fiedler, P., tohl, R., and Brad, Z., "Electric vehicles charger as a part of home area network," IFAC Proceedings Volumes (IFAC-PapersOnline) 11(PART 1), 180{185 (2012).

Zezulka, F., Sajdl, O., Bradac, Z., and Sembera, J., "Experimental smart grid," IFAC Proceedings Volumes (IFAC-PapersOnline) 11(PART 1), 416-419 (2012).

Behan, M., Krejcar, O., “Modern smart device-based concept of sensoric networks,” Eurasip Journal on Wireless Communications and Networking, 155 (2013).

Downloads

Published

2017-06-01

How to Cite

Slanina, Z., & Docekal, T. (2017). Energy Meter for Charging Stand in Smart Buildings. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9(2-5), 79–82. Retrieved from https://jtec.utem.edu.my/jtec/article/view/2402

Issue

Vol. 9 No. 2-5: Circuit and System Advancement in Modern World IV

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.