Comparison of Electrical Characteristics between Bulk MOSFET and Silicon-on-Insulator (SOI) MOSFET
Keywords:
MOSFET, Silvaco, DIBL, Athena, SOIAbstract
Conventional MOSFET has already passed lower than 45nm transistorfabrication. As silicon is now hitting the atomic resolution and reaching its physical and electrical limitation, producing a proper working transistor tends to be more difficult and complicated. The major challenge is to fabricate a transistor with anominal threshold voltage (VTH), lower gate leakage current (IOFF) and lower drain induced barrier lowering (DIBL). To overcome these problems, Siliconon-insulator (SOI) MOSFET has been proposed, and it is believed to be capable of suppressing short channel effects (SCEs) by burying oxide layer in the silicon substrate. ATHENA and ATLAS module of SILVACO software were used in simulating the virtual fabrication and electrical performance of the transistors. An investigation on the characteristics and performance of the devices has been conducted in order to compare their electrical characteristics. The MOSFETstructure was constructed byutilizingSILVACO Athenamodule,and the electrical characteristicswere simulated using SILVACO Atlas module. The results of boththe conventional bulk MOSFET and the SOI MOSFETwere analyzed. It was observed that SOI MOSFET was superior compared to the conventional MOSFET interms of their overallelectrical characteristicsDownloads
How to Cite
Issue
Section
License
TRANSFER OF COPYRIGHT AGREEMENT
The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):
- All proprietary right other than copyright, such as patent rights
- The right to make further copies of all or part of the published article for my use in classroom teaching
- The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
- The right to make copies of the published work for internal distribution within the institution that employs me
I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.