High Selectivity Microstrip Bandpass Filter Integrate with Ring Resonator Bandstop Filter

Authors

  • M. A. Mutalib Centre for Telecommunication Research & Innovation (CeTRI) Faculty of Electronic & Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya 76100, Durian Tunggal, Melaka, Malaysia
  • Z. Zakaria Centre for Telecommunication Research & Innovation (CeTRI) Faculty of Electronic & Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya 76100, Durian Tunggal, Melaka, Malaysia
  • N. A. Shairi Centre for Telecommunication Research & Innovation (CeTRI) Faculty of Electronic & Computer Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya 76100, Durian Tunggal, Melaka, Malaysia

Keywords:

Bandpass Filter (BPF), Notch Response, Ring Resonator, Tunable Filter,

Abstract

An integrated high selectivity microstrip wideband bandpass filter with ring resonator bandstop filter is presented in this paper. The bandpass filter consists of of 6 th λ⁄4 short circuited stubs and two-sections of open circuited stub at one end of the element. The integration with bandstop filter is realized using ring resonator. The experimental result shows that the bandwidth of the wideband bandpass filter is between 2.9 GHz – 5.8 GHz. The bandstop filter produced high selectivity and attenuation at resonant frequency of 5.05 GHz and Q-factor of 252.2. This type of filter is suitable for applications such as the multi-service and multiband communication system in order to discriminate the undesired signals.

Downloads

Published

2017-09-27

How to Cite

Mutalib, M. A., Zakaria, Z., & Shairi, N. A. (2017). High Selectivity Microstrip Bandpass Filter Integrate with Ring Resonator Bandstop Filter. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9(2-13), 39–42. Retrieved from https://jtec.utem.edu.my/jtec/article/view/2563

Issue

Vol. 9 No. 2-13: Research and Innovation towards Sustainability in Electronic Engineering

Section

Articles

License

TRANSFER OF COPYRIGHT AGREEMENT

The manuscript is herewith submitted for publication in the Journal of Telecommunication, Electronic and Computer Engineering (JTEC). It has not been published before, and it is not under consideration for publication in any other journals. It contains no material that is scandalous, obscene, libelous or otherwise contrary to law. When the manuscript is accepted for publication, I, as the author, hereby agree to transfer to JTEC, all rights including those pertaining to electronic forms and transmissions, under existing copyright laws, except for the following, which the author(s) specifically retain(s):

  1. All proprietary right other than copyright, such as patent rights
  2. The right to make further copies of all or part of the published article for my use in classroom teaching
  3. The right to reuse all or part of this manuscript in a compilation of my own works or in a textbook of which I am the author; and
  4. The right to make copies of the published work for internal distribution within the institution that employs me

I agree that copies made under these circumstances will continue to carry the copyright notice that appears in the original published work. I agree to inform my co-authors, if any, of the above terms. I certify that I have obtained written permission for the use of text, tables, and/or illustrations from any copyrighted source(s), and I agree to supply such written permission(s) to JTEC upon request.


Most read articles by the same author(s)

<< < 1 2 3 4 > >>